Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,169 Posts
The rear extension is kinda pointless with a 1-piece tilt-nose. It's designed to tie into the front flares for some rigidity and to maintain the lines. Keep in mind that you'll also have to do a good bit of trimming on the back edge of the front wheel openings which may interfere with the 1-piece nose if it has integral inner walls...this could also lead to problems with the location of the rear extensions if you're talking about the full-length ones with the step. Better do some measuring before you buy.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top