Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,958 Posts
No, a short blast won't hurt it, but neither will hititng the top of it with a hammer to bung up the threads. I drilled mine out to fit larger bolts, and added 2 more, so there are 6 holding it on. You can also add some of the green locktite to the threads, the kind that takes heat to remove. You won't get them off then, and they'll never loosen. Just some suggestions, good luck.

JEEPN
'81 CJ-8 Scrambled!
GM151/SM465/NP205 twinstick/7"Lift/33"TSL's/IHC D44's 4.10's Lock'd
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top