Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,838 Posts
If it were me I would use a small circular metal cutting tool and cut them out leaving a clean round hole , then put some thick tubes[sleeves] right through the frame and get long grade 8 bolts & nuts and go straight up out the top of the frame . better than factory !!

Jeff



O|||O /wwwthreads_images/icons/cool.gif
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top