Off Roading Forums banner
1 - 2 of 2 Posts

Discussion Starter · #1 ·
I just burnt my clutch last trip out due to a lot of mud. Its slipping. I have washed it out with the hose after the trip and done everything but take it out.

What should I do next? or what clutch would be best? 3 Finger clutch?

1997 TJ w/ 33's & 1984 CJ7 V8/35's

· Registered
6,355 Posts
/wwwthreads_images/icons/tongue.gif In all the years and years of using Borg & Beck clutches, I have only had one failure. In one of our 3/4T GMC's that has a twelve-inch, 12-Spring B&B clutch, the tremendous force required to de-clutch broke off a fulcrum purchase. Other than that ONE unit, I have never had a minutes' trouble either in racing or in low RPM pulling/inching. Always surface the flywheel when replacing the clutch/wwwthreads_images/icons/crazy.gif

Quadra-Trac modified by the crack moonguy/wwwthreads_images/icons/wink.gif/wwwthreads_images/icons/smile.gif/wwwthreads_images/icons/tongue.gif transfer case team.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.