Off Roading Forums banner
1 - 10 of 10 Posts
G

·
Discussion Starter · #1 ·
I am interested in getting a newer dodge dakota and putting long travel on it and i wanted to know where i could get it, and about how much it would cost to have it done. I would also like to know if there is a place where i can buy premade desert bumpers or if i would have to make them myself. And if there is any other information you can give me about making this truck into a prerunner, like suspension or after market parts please let me know. Thanks
 
G

·
Discussion Starter · #2 ·
I dont know of anyone that makes pre fabbed long travel or bumpers for Dakotas.

It will have to be custom. Nothing wrong with that if you got the know how or $$$$.
 
G

·
Discussion Starter · #3 ·
Thanks for your reply. I was starting to figure that out when i wasnt finding any one that made them when i searched the net. Do you know of any companies that make a 5 inch suspension lift for a dakota? thanks for your time and any answers you can get me.
 
G

·
Discussion Starter · #5 ·
Re: Where can i get long travel for a Dodge Dakota

thanks for your help. I have also found another company that makes one too but i forgot their name. They are a big company though it's just that i looked at a lot of sites lately so i dont remember. thanks again. bye
 
G

·
Discussion Starter · #7 ·
You might check with Blue Torch and see if they could help you. I would offer an address but they just moved to Birmingham, Alabma from Dothan, Al. and I don't have their new address. You should be able to locate them on the web.

Partsman
 
G

·
Discussion Starter · #8 ·
custom bumper would have to be made by someone for the dak and a lift also 3 inch is the max you can buy without it being custom, and it wont be the best for a prerunner . this is my dak i have a fabtech performance lift and a 3 inch body lift running 33x12.5x15 inch procomp m/ts
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top