Off Roading Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,366 Posts
Discussion Starter · #1 ·
hi there,

what would be options for transfers to put (be it divorced, be it mated) behind a sm420

the latest news is that i can get my hands on a EFI 2,4L Toyota engine, w/ only 35kMiles for 750bucks....

and check out this link:
http://www.ottindustries.com/Toyota_Bellhousing_to_SM_Trans.html

this could be my "small engine" combo... ;o) .... a health 2,4L and a muncie420

how do i get my d18 behind the sm420 w/out paying Adv.Adapt. 500 bucks ???

any other tranfer options? (passenger side drop)

thx for helping me over and over

alfred

 

·
Registered
Joined
·
306 Posts
you can use a divorced mount np205 or get an apapter from dovak they are ussually cheaper than advanced

if you cant dodge it..it must be a tranny shop
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top