Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
1,976 Posts
88 to,,I think 94, with the same vacuum disconnect switch, most 87s had a NP 207 as well as the earlier Cherokees. You can also use the Cherokee NP231 from 89 to 93. Just make sure the input shaft is 23 spline and the tag is on the unit and it states 231. Also check for the disconnect switch on the unit also. (where the vacuum lines plug into the x-case) if it is out of the Jeep already. You may get lucky and find one with the SYE kit already on it. But you will need a longer D/S for that one./wwwthreads_images/icons/crazy.gif The Dakotas I think also used the NP231 not sure if that was a direct bolt up but the drop was on the right side.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.