[Guest]

so far the best "bolt on" solution i can find is that bar that connects on top and below the axle w/ a shackle at the other end (who make it?).. on the street, my 4banger doesn't cause too much of a concern, but offroad, those springs wrap like crazy.. well, atleast the right rear does .. what's everyone else doing to cure spring wrap and not loose flex?.. thanks!

'89 YJ SOA w/2.5" OME springs,1"Body,4.56s,Ford 8.8" w/Detroit,EZ up front,Steering correction

 

[SonoraBob]

Try PartsMike or Sam's Offroad.

CJ-8, 4.0, NP435, D44 x D60, ARB's, 4w Disc, 2"YJ springs, SOA, 1" Body lift, 38.5" TSL SX

CJ-6, Cherokee

 

[kutyafal]

Hey, what steering correction are you running? I'm working no the same setup with the Ford 8.8 and SOA.

'91 YJ,I-6,2.5" lift,Boomerangs,33s,D30,D35c,Lock-Rights F&R

 

[Guest]

i'm running MORE's kit.. it's kinda pricey, but worth it.. only draw back is that it doesn't come with a steering stab bracket..

'89 YJ SOA w/2.5" OME springs,1"Body/1"Motor Mounts,4.56s,SYE,Ford 8.8" w/Detroit,EZ up front,Steering correction