Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
6,355 Posts
/wwwthreads_images/icons/smile.gif OOOOOOKayyyy......HERE is the real solution..... Remember, you don't WANT to weld to the frame if you can avoid it, AND....you want to spread the stress out over a long distance. So....you make a piece which saddles onto the frame......bolts in several places.....and then IT has the bar welded to IT. BE SURE that the whole thing will come off after the bars are welded...in other words, don't "capture" the bracket./wwwthreads_images/icons/smile.gif

CJDave
Quadra-Trac modified by the crack moonguy/wwwthreads_images/icons/wink.gif/wwwthreads_images/icons/smile.gif/wwwthreads_images/icons/tongue.gif transfer case team.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top