Off Roading Forums banner

webber carbs

395 Views 4 Replies 2 Participants Last post by  Sarge
G
iv'e read some where before that a wbber 32dgr fitted to a suzuki sj413 can be modified to stop it cutting out on hills. iv'e downloaded some basic instructions but could do with some diagrams/photos or even a link to a site to help out
See less See more
1 - 2 of 5 Posts
Ok , so is it a DGA or DGV? If it's the older style DGV, there is a set of instructions on izook.com about closing off the vent area behind the air jets . I do this quite often , but add an extended vent tube to aid in keeping fuel out of the air jets . Also, set the float to 1.5" and 1.75" max drop , helps quite a bit . Keep the fuel pressure down around 2.5, or even 1.5psi offroad as well . Float bowl to the rear, ect...
Sarge
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top