Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
122 Posts
Discussion Starter · #1 ·
So I got my one piece shafts in. My friend and I drive it around and the shafts are hot to the touch. Then next day we tear it all apart again and using some of those shims, shim the backing plate out (4 thinck ones on ones side and three on the other) basically what we did was shim it out until we got play and then back it off a shim. anyways so now I am driving it and the shafts are still getting warm but not hot, is this normal for one piece shafts? how much heat can a bearing withstand? any help or experience in this would be great..I am going to jack it back up tonight and see if there is any play in the bearings after driving 70 or so miles

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.