Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13,432 Posts
Often a owner will change the trailer harness connector to mate with the Vehicle connector. If it's OEM you'll be in luck. Were I you, and I did not want to remove the existing trailer plug, I'd do the following:

1. Determine if the Vehicle plug is OEM.
2. IF so pick up a mating plug, they should be readily avaliable.
3. Splice it into the regular harness, so the trailer could be used by multiple vehicles.

Is the connector unusual? Nope...there are multiple types of vehicle and trailer harness plugs/connectors and all wanting to be the standard.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top