Off Roading Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
4,520 Posts
ok.. i am doing this setup.. and will be getting the drive train in this week.. hopefully... but there is one thing i am concerned about.. it seems in the truck versions.. there is a 5" adapter on the front of that T-18.. i have gotten down to the shop to do any kind of measurements.. to see how that puts into effect of where that tranny is located inside the tub.. it might be too far back.. and on a cj-5.. well you might just have one short rear drive shaft.. hopefully i will get down there in the next 2 days and inspect this..

survival is instinct, but living takes guts
 

· Registered
Joined
·
4,520 Posts
ok.. said i would keep you posted.. mine is out of a 73 j-20.. has the 5 inch spacer.. and i measured it... its only 2 inches longer than my 3 speed.. looks like it will fit in my 7.. when i put it in this week.. i will post it on my web page next week..

survival is instinct, but living takes guts
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top