Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
333 Posts
Here's a thought, can't confirm it but have heard of people doing this...

Look for a Jeep truck with a 258 six in it with the T18, this T18 has
the short input shaft like the CJ's used and bolt it in...with the obvious
drive shaft lengthing and shorting

Luke

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top