Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
1,401 Posts
I've never seen this done BUT, i was talking with a jeep buddy and we noticed how thick the spring pearchs on a stock YJ dana 30 are. they mount the spring about 1 inch below the axle tube.
so, my idea would be to cut off the factory spring pearch and put some new ones on (at the same caster) but would allow the springs to be mounted about 1/4 inch from the tube(enough room for that center spring assembly bolt)
this would cost about $20 and provide 3/4 inch of actual lift /wwwthreads_images/icons/smile.gifabout the same a 1 and 1/2 inch longer front shackles /wwwthreads_images/icons/shocked.gif

My Jeep Page
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.