Off Roading Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
398 Posts
Discussion Starter · #1 ·
Recently bought a 94 burb for the wife.Went to get an alignment and I was told to adjust the camber,caster you need to take off the a arm and knock out a pre-puuched hole.The haynes manual says you need an alignment kit?I'm sure somebody has done this.Any help would be appreciated.

Thanks

RIP 3

 

·
Registered
Joined
·
398 Posts
Discussion Starter · #3 ·
well,they wanted 135 bucks labor to do both sides and I would have to come back as they were booked up that day.The guy at the shop said it was'nt that big of a deal,just takes time to get everything apart.That's why I posted to see if anyone had done it and could give me some info.

Thanks

 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top