Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
1,929 Posts
Black is ground
Red is keyed power
Yellow is continuous power

I recommend adding a fuse in the red line if it doesn't have one. You can use a tester to locate keyed and continuous power sources. Connect the black wire to some metal on the chassis, scuff the paint so that you have a good bare metal connection.

1985 CJ7 4.2L, T-176, Dana 300, 2.5" lift, 32"BFG MT, Durabak On-Board Air
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.