Off Roading Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
hey guys
i have just got myself a dv models tx2 4wd buggy and am having some problems with getting it started when i first start it it idle's for about 10 seconds then just goes dead in an attempt to fix this problem i now cannot start it at all i have set it to run as rich as it can and then tightened up the screw with half turns until it was as lean as it could go but i still cannot seem to get it right does someone have this same buggy and have they had the same problem or does any one have any tips that might help me get it right
remember i cannot get it to start at all atm

*Edit*
sorry guys i gotgot to put my engine model
Force 21R/ABC
i have set it up as factory as well but yeah still nothing
 
G

·
Discussion Starter · #2 ·
hello i have 2 rc nitro if you got it bran new the way it came it should have pre set for the fisrt break in runs have u done this? u also needing it to break in running idleing for a period of 1 hr ive done this with my tmaxx and my evader and evo, u said it wont run at all u should have got a manual that came with the buggy read that and see what settings u need it to be on i know my evo during winter runs 1 1/2 turns out and the speed idler need to be set too 3/4 turn in if you cant find it in your manual look it up on the main website that makes them and they will have a manual there that will help u good luck!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top