I had a squeaking noise in my Cjj once that turned out to be the ubolts loosening up. Check those when your under there
greasing the driveshaft.
Wayne
greasing the driveshaft.
Wayne
sqeaking/brushing noise
I've had this little sqeak (sorta sounds like worn u-joint) that developed since I installed SYE and rear driveshaft. I just greased the rear u-joint (since i disassembled it while installing and figured it might need want grease), but the noise is still there.
It seems to go away after 15-20 minutes of driving, but after jeep sitting for a day or two, it's again there.
I will have to check the u-joint again (maybe take it apart tpo make sure it's all put together correctly), but what else could be causing it?
<>< 1992 YJ, RE 4.5 XD, 32" BFG ATs
http://dennisuello.tripod.com/
http://members4.clubphoto.com/denis289450/ - my photo page
It seems to go away after 15-20 minutes of driving, but after jeep sitting for a day or two, it's again there.
I will have to check the u-joint again (maybe take it apart tpo make sure it's all put together correctly), but what else could be causing it?
<>< 1992 YJ, RE 4.5 XD, 32" BFG ATs
http://dennisuello.tripod.com/
http://members4.clubphoto.com/denis289450/ - my photo page
1 - 1 of 6 Posts
1 - 1 of 6 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Off Roading Forums
A forum community dedicated to all off road vehicle owners and enthusiasts. Come join the discussion about performance, engine swaps, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
Form Lighting
8 Replies
Diode Dynamics
5 Replies
seoautoparts
2 Replies
Recommended Communities
