Off Roading Forums banner

Shaving the AMC 20 HD (not very Dialup Friendly)

8K views 11 replies 6 participants last post by  bandhmo2 
nice job.. did you use 1/4" for the bottom? if so, i'll warn you about it deflecting... but you should be good with 1/4" of clearance to the ring gear...
 
Re: Shaving the AMC 20 HD (not very Dialup Friendl

it sounds like you put some thought into this.. and it also dosen't seem like you will have a problem with that plate..

it looks nice.. and 1.5" of clearance for some work.. is well worth it..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top