Off Roading Forums banner

Roll Bar Swap

397 Views 1 Reply 2 Participants Last post by  Jeepskate
I found a roll bar out of an 94 Wrangler. I have heard that the main cage will bolt into a CJ-7. Is this true? I want a little more protection in the back for the grandkids. They love to ride in grandpa's Jeep!

Patrick Kulas
85 CJ-7
1 - 2 of 2 Posts
Yes, it will bolt right in. Generally only 3 out of the 4 bolt holes in the main hoop feet will line up. This is fine, but you can tweak the remaining two holes if you feel the need to put the other 2 bolts in. I did it with an '87 YJ tub and have a couple of buddies who did it with CJ-7's.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.