[Guest]

rancho 4\" lift kit

I've been reading some of you guy's post and some say that the 4" rancho kit is actually 6". I ordered a 4" rancho for my 2003 silverado. Will it actually be 6"? How about the rear end is that 4 or 6
thanks for your help

 

[889]

Re: rancho 4\" lift kit

it depends on what setting u put your torsion bars at. I think teh brackets actually drop everything 5.5"

 

[GoCougs]

Re: rancho 4\" lift kit

I have talked to one of the guys at Central 4 wheel drive and they say that the Rancho kit is only 4 inches. if you want more you can crank your t-bars but that is not advised.

Mitch

 

[The_Kid]

Re: rancho 4\" lift kit

mots 6" kits arent even 6"s without alittle cranking

 

[Guest]

Re: rancho 4\" lift kit

I have one on a 99'NBS and it gave me a full 6" with the t-bars set back to stock position. the sub frame drops 4.5" but everything else drops a full 6". The kit actually has you de-crank the tbars in order for it to be a 4" kit. But for the most part you will be about 5" and level front to back with decent cv angles.

 

[The_Kid]

Re: rancho 4\" lift kit

is that the new spindle kit that lowesr just the lower controls arms and has a raised spindle to keep the upper control arms in the sme location as factory along with the steering

 

[Guest]

Re: rancho 4\" lift kit

So should I be able to fit some 35's pretty easily under this kit?

 

[The_Kid]

Re: rancho 4\" lift kit

yeah I should you should be able to.

on some 8" wide wheels and a decent backspaceing, 4.5"s or so but you may even get away with 3.5"s of backspaceing.

 

[Guest]

Re: rancho 4\" lift kit

So would you get 35's instead of 33's?

 

[The_Kid]

Re: rancho 4\" lift kit

yeah Id defiantaly go with 35s

Im running 35s under 3 solid inches of lift and nothing more than alot of fender trimming and uhhhh modifing.
if you get 4-5"s youd be able to do it with alittle bumper trimming