Off Roading Forums banner

Quickest way to test a compressor

268 Views 2 Replies 2 Participants Last post by  JerseyZuks
Without hooking it up to a running zuk
(which I don't have at this time
is there any way I can test a compressor to see if it is any good?

I have a chance to get a compressor from a 1.6L 16v tracker, and I was thinking of using it for an on board air setup. The guy is only asking for a few bucks, but doesn't know if it works.

I was thinking that if I hook it up to 12v and spin the pulley, I should feel tiny puffs of air. Would this work, or am I way off base on this one? Sorry if it sounds like a dumb question, but I didn't find anything in the search and I haven't worked with compressors before.
See less See more
1 - 1 of 3 Posts
Hehe, that'll tell if it moves air. The AC compressors compress to ~~ 200+ psi. I don't think a turn me by hand test will be accurate.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.