Off Roading Forums banner

quick CJ spring hanger removal question

332 Views 3 Replies 3 Participants Last post by  irjpr
I am trying to remove my front axle rear spring hangers so I can outboard the springs. The hangers don't appear to be welded around the edges, it looks like their are two big either spot welds or rivets or carriage bolts? The frame is boxed where they are, so I cant see the inside, should I cut these nubs off, and try to pund the suckers off? If not how do I get the things off.

1 - 1 of 4 Posts
Grind the rivits down, but I can't remember if there is a single stitch weld along it, it should be evident. I removed mine years ago and outboarded them.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.