Off Roading Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
Repacking the wheel bearings and am ready to re-install the Warn hubs
What is the torque on the inner spindle nut to laod the bearings?
Then you back off 1/6th turn and install the washer
Then the outter nut
What is the torque on that one
Factory manual says nothing and dont remember

Chu
YJ-7
V.P. New England 4x4
Yankee Toys
EC4WDA

 

·
Registered
Joined
·
325 Posts
50ft lbs on the inner, back off 1/6 then 50ft lbs on the outer. I just did mine also.

/wwwthreads_images/icons/cool.gif
JK
O|||O
78CJ5 258
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top