Off Roading Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
873 Posts
Discussion Starter · #1 ·
I just removed the whole mess of wires that was previously attached to my cpu in my 84 CJ-7. While doing this, I realized that the power wire going to my electric choke was in those wires. So, first I'm thinking that my electric choke was never hooked up and working at all, but I'd like to fix that. So where should power for my electric choke come from? It's an 84 258 with HEI, Weber32/36, no computer and no emmissions stuff, and at the moment no body.
Thanks for any input and Merry Christmas!

Dan 84 CJ-7,Weber,HEI. 95 ZJ,V8. http://netnow.micron.net/~wdohrn/
 
G

·
I just wired mine in on my 80/wwwthreads_images/icons/smile.gif. I picked up an oil pressure switch (any auto parts store should have one) and ran the power to the choke through the switch. Any 12 volt source works, but the original was wired so it only works while the engine is running/wwwthreads_images/icons/cool.gif.

~|_____
__|____|__
/-/wwwthreads_images/icons/smile.gif||||/wwwthreads_images/icons/smile.gif-\
(/wwwthreads_images/icons/cool.gif)-o--(/wwwthreads_images/icons/cool.gif)

Randy 80 CJ5
 
1 - 3 of 3 Posts
Top