[Guest]

are you able to replace the Power steering High pressure hose from underneath or will I have to remove my welded on Warn12000?
84 CJ7

Brian "A4x4jeeper"
http://members.aol.com/a4x4jeeper/
http://www.jerseywheelers.org/

 

[Guest]

You should be able to. If I remember correctly you should be able to slip a flarenut wrench (so you dont strip the nut) onto the powersteering box from underneath. Might be a little awkward but possible. The only other issue might having to route/place the hose in the proper position.

Jess

 

[Guest]

You could always unbolt the box.

Brad (from the 4 Wheeling center of the universe, 4 corners USA)

 

[Guest]

I can't remove the steering box. See, my winch is mounted to a winch plate which is welded to my jeep. The bolts for the steering box go through that plate that its mounted to right? Or am I able to remove the box from underneath?

Thanks.

Brian "A4x4jeeper"
http://members.aol.com/a4x4jeeper/
http://www.jerseywheelers.org/