Off Roading Forums banner

Please help Project Jeep

316 Views 2 Replies 2 Participants Last post by  jeepgod
When I pulled my engine yesterday I finally got a good look at the tranny. It rocks from side to side even while bolted to the skidplate. Is this normal or are my tranny mounts shot??

1987 YJ Laredo
Rylan D.
1 - 3 of 3 Posts
the stock mounts are made of plain rubber, they will rock a little, but it is in your best interest to put polyurethane ones in anyway.. i break a lot of tranny mounts

it's sort of still a cj thingy....
Yes your tranny is mounted so it will rock back and forth, goes with the torque of the engine. and i would also put poly mounts in.. with some heavy bolts.

survival is instinct, but living takes guts
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.