[OverDriven]

Just curious on something. Anyone know the measurement on what the "Original" bumper height of a '90 2dr Cherokee should have been. I want to know so I can "estimate" what kind of lift I have.

I didn't purchase a lift, I'm using Ford F150 front springs with home made spacers and Dodge Dakota rear leaf springs. Works great but I'd like to get an idea of what height I've added. My Jeep had sagged pretty bad before I started lifting it so I can't go off of the before and after measurements.
Thanks,
TXJ

 

[2586]

I think the measurement from center of the wheel to the bottom of the un-cut flare is 17.5in front 17in rear. If you do a search this has been done before.

 

[OverDriven]

I've cut the front already but not the rear. I'ts only at 18" Which means I've only lifted it 1". Think I'll throw another leaf into the back to get another 1 1/2 inches in the back then install the ZJ springs I just got in the front.

Thanks,
TXJ

 

[2586]

here's the search, http://bbs.off-road.com/ubbthreads/showflat.php?Cat=&Board=offroadjeepcherokee&Number=1193150&page=&view=&sb=&o=&fpart=1&vc=1