Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10,815 Posts
Your words:
""""I do have voltage going from the coil into the distributor cap but it’s not getting to the plug wires. I ran out and bought a new cap and rotor. Still no spark to the plugs. """"

If high voltage is coming out of the coil, - you know the pick-up coil and crank sensor are working - else you wouldn't have that high voltage.
Check the coil wire at the distributor end, sounds like it's getting lost in the coil wire = bad coil wire.

If you know for sure it's going in the cap's center tower, but it doesn't come out ant plug wires - it has to be getting lost inside the distributor. Look close.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top