Off Roading Forums banner
1 - 1 of 20 Posts

· Registered
1,126 Posts
The ABS plastic flares are screwed to a metal mounting surface that is spot welded to the side of the Samurai. I hope this makes sence. The metal part can be removed without damaging the side of your Samurai if extreme caution is used. Personally I would leave the metal flasre on and find a set of plastic flares in better condition.

Tim Martin
87' Samurai/1.6L/dual 40mm Mikunis/header/2" exhaust/MSD 6AL/5.5" SPOA/1" shackle lift/CJ-5/Sami springs/31" High-Tecs/roll cage, bumpers & pumpkin caps in progress...
1 - 1 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.