[995]

I thought that I was done for a while but now I am working on some timeing on the 350 chevy and came acrossed a part that I heard when trying to start it up,the noise was a clicking niose that was coming from a little box on the front passenger side fender. The box is aprox.2"x2"x1"thick. The box had 2 wires coming off it. When I did the swap I pluged the wires back in and thought nothing about it. What is this and do I need it? Would this box mess up the timeing or vacume on my 350? I would love to know what this box is. Thank you Aaron

 

[995]

Help!!! I hope someone knows what this little box is. Help!!!

 

[GeeAea]

Re: Need HELP on 151 to 350 swap what is this par

You gotta say where the wires go or something ..or get a camera and take a digital picture.

Let alone its Sunday morning. You should either be in church ...or recovering from Saturday night.

What happens if you just unplug the thing?

 

[Guest]

all you need to run your sbc is a +12v to the ignition, the +12v for the starter and the fuel line. Unless is a fuel injected engine, then I cant help you there, is more complicated. But again if is a carburator engine then, is an easy swap and the box your talking about shouldnt make any difference on your timing,.
junior

 

[995]

Thanks

 

[Guest]

The box you are referring to is the relay to supply
voltage to the electric choke coil.

 

[995]

Thanks I have no choke now. I am glad that it in not anything that I need.