Off Roading Forums banner
1 - 2 of 3 Posts

· Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
i got a rc car from one of my friends and i fixed it, and now im putting it back together but i realised that the sticky stuff (maybe the fuel???) made the inside of the engine really stuck, i can move it around when i pull the starter, its just wayyyy hard to pull out, any tips on how to fix the problem????
Thanks alot guys
 

· Registered
Joined
·
13 Posts
Discussion Starter · #2 ·
Hey guys, i got it. I took off the glow plug, put fuel in it, then i tried turning it over and pulled so hard that the knot holding the little handle on the starter string gave out and the string went in the little...uhhh storage place for the string?? i dont know if that has a name. So i had to take off the cover for that and had to let the spring/coil pop out had to reinstall that, then a half hour later tried to pull it again and it came loose. put my car back together and it started right up, i was very suprised becuase the car hadnt run in years. I drove it for 5 mins then it got dark so im gonna take it for a run today, hope all goes well
 
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top