Off Roading Forums banner

Motocarb Question for CJ-8/5.2

340 Views 2 Replies 1 Participant Last post by  CJDave
2
/wwwthreads_images/icons/tongue.gif Along with our 2150 carb from the 91 Waggy, we got a little electric vacuum valve. It has good-sized hose barbs on it and there is one hose still on it, about six inches long. The valve has a short input of 2-conductor wire with a plug-in. What IS that little valve, and does it have a place in our '79 system? There is no mention in the manual for the CJs. Also, what is the "dump valve" which the diagram shows "teed" into the EGR line? And more to the point...do we need to find one for our setup? Thanks in advance for your help, Marty. /wwwthreads_images/icons/wink.gif

CJDave
See less See more
1 - 3 of 3 Posts
2
/wwwthreads_images/icons/tongue.gif I just posted this reply to move the main thread up to where Marty might see it./wwwthreads_images/icons/blush.gif

CJDave
See less See more
2
/wwwthreads_images/icons/tongue.gif Im just posting this up to the top in the hopes that Marty might go to the BBs and see it. He is the sultan of smog where Jeep V8s are concerned./wwwthreads_images/icons/crazy.gif

CJDave
See less See more
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top