[631]

I have a fuel injected 1.3 and i need as much power as possible so give me some ideas please guys cheap and not so cheap..
thanks

Mark
90 samurai,5.5 SPOA,2"over shackles,front locker,welded rear removable doors,working on onboard air,
96 sportage 4x4 wifes grocery getter.
"Life is short play hard"

 

[Guest]

Roll up the windows and turn off the air, that should give you a couple more MPH!

Tell us all that you have and we can have a better idea on what suggestions to offer. Is it a stocker? Maybe a cam or a header? New exhaust and a K&N filter is always a good bet. How much power are you looking for and in what power range?

wes.

http://albums.photopoint.com/j/AlbumList?u=1596164&f=0http://albums.photopoint.com/j/AlbumList?u=1596164&f=0

 

[Guest]

Intake, cam, header, exhaust, ignition.

Anything beyond that gets really pricey..... pulleys are a minimal gain, as is an electric fan.... port & polish costs alot......

91 Suzuki Sidekick JX Softtop. K&N Filter, Modified Intake, Aurora 8.5 mm Plug Wires.
http://www.geocities.com/vtecsucks

 

[Guest]

We have a good little combination kit which uses some of the industries best components for a good upgrade, the 'Power Punch' (Thorley header, Isky cam, K&N Filtercharger).
http://www.rocky-road.com/zukengine.html

http://www.rocky-road.com

 

[Guest]

Try changing your gears,That won't give your motor more power but it will help if you have bigger then stock tires.

QuadZuki,87 spoa,33"wild countrys

 

[Guest]

lower gears will also put more power to the ground where ya need it.

build it, break it, then build it better.

 

[Guest]

Or go for a engine swap can't beat displacement.......

SPEED KILLS BUT YA GET THERE FASTER

KTM 500