Off Roading Forums banner
1 - 2 of 2 Posts

·
Official Curmudgeon
Joined
·
4,707 Posts
Discussion Starter · #1 ·
I have a Model 20 with Summers Bros. full floater axles and I'm having trouble keeping oil from getting
past the seals. A friend of mine bought a set a few months after I did and he has same problem.

 
G

·
A couple months ago I talked to Warn about this very problem. It is a problem that is known to them, it is usually due to the axle tubes being very slightly bent, they are the weak point in a model 20. They recommended getting the tubes straightened BEFORE you do an install, and they VERY HIGHLY recommend trussing the axles.

Brad (from the 4 Wheeling center of the universe, 4 corners USA)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top