[Guest]

boy oh boy. got almost everything i need to have some fun , locker 33s suspension lift , and now my jeep doesnt engage into
4 low, tried rocking iteverything, man i just want to wheel any help or suggestions. and unfourtunately i am not mechanically
inclined. but thats why i got the jeep thanks

 

[041]

Some times when you lift a jeep the floor gets in the way of the t-case shifter.Try to get the boot off and take a look to see if the floor prevents the shifter from going all the way down.If thats the case,a pair of metal snips could do wonders!I hope this helps out!

Ben

 

[Guest]

i thouhgt about that but i can feel the stick " shift" you know, it just wont gointo 4 low

 

[Guest]

Here is what I do when that happens. Put the tranny in first gear and then slip the clutch, then try and move the shifter into 4lo. Sometimes you have to do that all at the same time in order for it to work. I hope this helps and if not maybe tell us what you have done so far so we can help.

Tim 85 CJ-7

 

[Guest]

sounds to me like the linkage needs to be adjusted ,did you lower x-fer case with the lift,if so check your linkage