Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
445 Posts
Hey guys, I may be dense but I can't picture how the clamps stay on the spring if you bend the sides straight up and down. What keeps the clamp from sliding down and of the spring? Am I missing something? I have the stock springs on my CJ-7 and the clamp is basically a band of u-shaped metal that goes under the spring and up the sides with another piece of metal w/2 slots in it that the tabs slide thru and are bent over. Uh, I thing I just confused myself. Enlighten me please.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.