Off Roading Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
977 Posts
Discussion Starter · #1 ·
Automotive lighting Nickel Auto part Gas Metal
T/C innards

Automotive tire Wood Gas Auto part Machine


note that the bearing is pointed out and in two pieces...crunch, crunch, BANG!
note also that the screwdriver is pointing out the missing teeth on the gearshaft

Surprisingly the transfer case itself survived! Rebuilt and back on the road. These Zuks are amazingly tough
 

· Registered
Joined
·
977 Posts
Discussion Starter · #2 ·
Rro

BTW, the reason for the failure was due to the imbalance of the reduction gearset (note weld) I would never believe that you would be able to balance the gearset without removing metal somewhere
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top