Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
786 Posts
I found the same thing here. I tried to do the swap on a 79 CJ using the blazer WITH A/C and found it would not bolt up to the heater box. The mounting flange on the motor was set too far back and the motor would "bottom out" before the flange reached the heater box. Went back and got one WITHOUT A/C and it bolted up just fine. Without A/C worked just fine on the 83 CJ I'm doing now.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top