Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,958 Posts
When I had to change axles (spun a 2-piece), it cost me for the bearing and retainer, but it only cost $10 to have the new bearing pressed on at a local maching shop. Check around, it's usually cheap as it takes no time with the right equipment. It's a relatively easy fix, you'll see once you get into it.

JEEPN
'81 CJ-8 Scrambled!
GM151/SM465/NP205/7" Lift/33" Swampers/D44's F&R 4.10's & Lockrights
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top