Off Roading Forums banner

HELP! TH 400 Vac. Modulator spring

1538 Views 2 Replies 1 Participant Last post by  JeffMurray
I've posted this question on three other boards and showed it to three different mechanics, no help! I changed a leaking o-ring on my '72 Commando's modulator. While lying under the rig with transmission fluid running down my arm, a spring fell out. No one knows how this spring goes back in! My manuals are no help. It is a funky looking piece of spring steel that somehow goes inside the fitting the modulator plugs into. Can anybody help?

1 - 2 of 3 Posts
I'm assuming you mean the end that is sort of squared off. It hooks in the modulator and then the whole thing gets pushed in? This is what I came up with after studying the wear pattern on the spring. I couldn't see any other way it would fit better. Thanks!
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.