Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,223 Posts
If you have a long punch you can carefully hammer it out from the back side.Turn the knuckle all the way to one side and put the punch on the part of the spindle that fit into the knuckle and knock it loose, then trun the knuckle the other way and do the same. Its a tight fit to get back there but its worked for me.

Wayne in Hawaii
"PYRO II" '77CJ5

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top