Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
1,929 Posts
If your stepper is working then there is no reason to unplug it. You also don't need to do the Nutter bypass. Just get a working HEI and new plug wires and you are set. I got an HEI at Aaron's auto parts on S. Congress for $45. The AMC drive gear from 4WD Hardware is about $20. All I need are the plug wires and a couple of hours for the install. Let me know if you need any help.


P.S.I have my stepper unplugged because it isn't working properly.

85 CJ7-4.2L,T-176,D300,2.5" lift,32"BFG MT,Durabak,York-Air,HEI?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.