Off Roading Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,126 Posts
I reused mine with no problem too. As long as you can get consistent torque readings on them, they should be fine.

87' Samurai/Suzuki Big Block/dual 40mm Mikunis/header/2" exhaust/5.5" SPOA/1" shackle lift/CJ-5/Sami springs/31" High-Tecs/roll cage, bumpers & pumpkin caps in progress...
 

· Registered
Joined
·
1,126 Posts
Another thing I forgot to mention is to examine the threads and made sure they are super clean before reusing them. I sprayed them with brake cleaner and wiped them with a shop towel. Then I sprayed some cleaner in the bolt holes in the block and blew them out with compressed air. I think if the threads are not clean it can give you a false torque readings.

87' Samurai/Suzuki Big Block/dual 40mm Mikunis/header/2" exhaust/5.5" SPOA/1" shackle lift/CJ-5/Sami springs/31" High-Tecs/roll cage, bumpers & pumpkin caps in progress...
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top