GRS I - blues

250 · Aug 12, 2000

hi,

just put the grs I on and i am getting vibrations (especially en 2nd) between 2-3000 revs (when accelerating or applying motor brake)

some ideas? (my garage "made the case tighter" - it needs more effort now to shift from 2hi to 4hi)

... also i remember there is a setup that permits to run the grs1 en 2hi and 2low right - any links highly appreciated

thanks
alfred

rangerrick · Aug 12, 2000

hi alfred,tight is not always a good thing.find out from your shop what spec. they used building your case. www.izook.com-article on 2wd-low.have it in mine and like it.www.geocities. com-article on 4.16 rocklobster-http://redgum.bendigo.latrobe.edu.au/~jeff/xfer2.htm-4.16 xfer case article.,hope this helps.ranger rick

THANK GOD FOR VETERANS AND SUZUKIS-BOTH KEEP YOU FREE. FOUNDER;INDIANA SUZUKI EMERGENCY RESPONSE TEAM

250 · Aug 12, 2000

yes, helped ... a lot...

thanks

Alfred

ps: ANYONE has any torque specs on the x-case?

255 · Aug 12, 2000

front case bolt 9.5-16.5 lb-ft
center case bolt 9.5-16.5 lb-ft
mounting bracket bolts 13.5-20 lb-ft
transfer mounting nut 18.5-25 lb-ft
counter shaft lock plate bolt 7-12 lb-ft
cross joint nut and bolt 17-21.5 lb-ft
oil plugs 26.5-39 lb-ft
universal joint flange nut 80-108 lb-ft

GRS I - blues

Our Vendors

Top Contributors this Month

Recommended Communities