if its the big older style it will not work nto big
you need a new model small one with the right front face plate so you can make the front adj bolt work

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

Parker, what is that hidious thing in your signature?

-Ryan
'88 Sami. Moderately modified. Two track mind
ZuksRule@Aol.com

 

from what years? ya this thing is pretty huge... and ugly lookin like that thing you have lol

 

ZuksRule

what are you talking about ? you dont think it looks like me ?
LOLOLOLOLOLOLOL!!

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

Here is a pic of the GM alt (left) next to the stock alt (right).

JEEPN
Winter Harbor, Maine
'81 CJ-8 Scrambled, It's a Jeep, Chevy, IHC kinda thing!
'88.5 Zuki, 7" Lift, Locked, Swamped, Rolled, and just generally broken in right!

 

WOOHOO! TY! JEEPN! that looks exactly like mine, now, all i need is a bracket.... hhhm

 

dude I just got mine from roadless gear and it looked so easy that I am very up-set I did not fab some up but...I had never seen any before!

" Go Cheap n' Smooth or Forget about it!"
Thanx
Studly
92 Zuki/31*10.5's/header/cherry bomb exhaust/body lift/shackle reversal/soon to be SPOA/ snorkel/stock gears and still have 5th!!

 

well if i had a welder, id try....

 

heres mine i mane in about 20 minutes

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

dparker what are your deminsions on the bracket?

Drive fast and take chances.

 

going out to shop in the morning well get some more photos and measure it for you . it was preety simple you use half the old braket

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

Thanks


Drive fast and take chances.

 

satchmo88

the two long piecse i made measured ext 3 inches long. the space between them where the alnt fits in is 2 inches. that photo i posted yestrday shows the 2 long peices i made welded to far back when i first istalled it. my belt was not strait so i took them back off and all you have to do to get it strait is but the frist 3 inch piece with the very edge of the part of the orginal brakett you use . heres some photos

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

and i reused my orginal belt

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

pic 3

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

last 1

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

for the top you can see i just cute the orgianl one up from factory weled it up on the end and reused it i hope these help .

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

so you do not have to get a new belt when doin this swap!

" Go Cheap n' Smooth or Forget about it!"
Thanx
Studly
92 Zuki/31*10.5's/header/cherry bomb exhaust/body lift/shackle reversal/soon to be SPOA/ snorkel/stock gears and still have 5th!!

 

Thanks again Dparker

Drive fast and take chances.

 

i did but i mught have got lucky

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

GREAT PIX MAN!

I really need a bracket by this weekend, zuk havin a hard time stayin "alive" hehe oh man, on my way home i coasted to a stop, and then it died, right in the middle of the street. i turned red! and even though it was cold outside, i felt really heated up pushing zuk to the curb... *shakes head* LOL man, that felt crazy.

anyone close enough to get a bracket here by fri-sun?

 

i think the steel i used is 1/4 thick

RUN IN TO YOU LATER ,and yes if you dont no it buy now i cant spell LOL!
Tryin to get this thing done for Zukmelt

 

If ya lived in Lawrence, I could bring my welder up for you to use on Saturday -- I'm working the KU-SC state game at Allen Fieldhouse for ESPN2. (shading cameras...)

Oh well... (LOL)

Ack

 

hehe thats cool ack, no problem, think i found a friend who knows a friend (one of those things heh)

dang, espn2? take the camera outside and shoot some pix of your zuk on TV! LOL that would be kinda funny

 

Hey PARKER,
thanx for the info. Could you help me out with the wires. I have an alt. that came off my C10 it has a plug with 2 wires and a wire attached to it. So could you please help me out with this once again thanx
GAZUKI