Off Roading Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,286 Posts
Discussion Starter · #1 ·
Hey All
Anybody got any tips or tricks to get all the water out of the oil passages after a blown head gasket? I replaced the gasket(and head) and have ran new oil for about 20 seconds and drained that oil(totally white). Should I keep doing this tell it's clean or what? TIA

Wayne in Hawaii
PYRO II, 77CJ5
 

·
Registered
Joined
·
3,478 Posts
Not only that but I would change the oil and filter again after about 100 miles of operation. Oil and filters are cheap and you have to make sure you've gotten ALL the water out!!!Good Luck!!/wwwthreads_images/icons/smile.gif
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top