Off Roading Forums banner
1 - 1 of 3 Posts

· Registered
6,355 Posts
/wwwthreads_images/icons/smile.gif Yep...that's my guess. The heat from the exhaust dries out the ground connection to the side of the frame from the tank sender. The sender has an independent ground, it does not depend on the tank. Sounds like you need to establish a new ground. While your at it, how about grounding all three Jeeps? You know,.....the chassis....the engine and tranny group....and the tinware(body). You need to ground the tub and front fenders separately just to be sure. This will improve all sorts of things, you'll see/wwwthreads_images/icons/crazy.gif

Quadra-Trac modified by the crack moonguy/wwwthreads_images/icons/wink.gif/wwwthreads_images/icons/smile.gif/wwwthreads_images/icons/tongue.gif transfer case team.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.