[294]

You are out of luck for an off the shelf replacement. Parts stores carry flexible filler hose that you should be able to use, or even a radiator hose will work, but it will not last as long. A hose shop can custom bend you a filler hose, that is the best way to go, bring them your old one and have them make a new one.

John
48 CJ-2A, 49 Willys truck, 70 Jeepster Commando, 89 Wrangler, 98 4x4 Tacoma

 

[294]

Fuel filler hose should not have a spring running through it, that is radiator hose. Look on the hose, it should have markings that say it is safe for use with fuel. Bending it just means it is flexible, by no means will it retain that shape. Having one made will make it retain the shape of your original hose. Tom's sealant idea is a good one depending on how bad your filler hose is. It sounds like you already have a radiator hose in there though.

John
48 CJ-2A, 49 Willys truck, 70 Jeepster Commando, 89 Wrangler, 98 4x4 Tacoma

 

[294]

I will look, but none of the pre bent ones or universal ones here have wire that I have seen. Most ungrounded wires around gasoline tent to collect static that causes sparks and stuff, not the greatest around gas tanks. $.02

John
48 CJ-2A, 49 Willys truck, 70 Jeepster Commando, 89 Wrangler, 98 4x4 Tacoma

 

[294]

So you can or can't see the spring in a filler hose? If you can't that would have not seen one. I cut my original filler in half, no spring in there.

John
48 CJ-2A, 49 Willys truck, 70 Jeepster Commando, 89 Wrangler, 98 4x4 Tacoma